Bottom-discharge depalletizers

Full-layer depalletizing system, with containers discharged at low level (800 – 1200 mm).

The layer separators on the pallet must be flat sheets or inverted trays (caps).

A drawer-type head, holding the layer on all 4 sides, is mounted on a carriage that moves up and down on guides fitted to a 2-column structure, so that each layer can be picked up from its height on the pallet.

The head pushes the layer onto an intermediate plate, then both move to the required container discharge height; the head then pushes the layer from the intermediate plate onto a motorized accumulation table, followed by a conveying and alignment system.

The machine can be supplied with different levels of automation and accessories, depending on the production speed:

• with pallet placed on the floor and manual removal of tier sheets / trays
• with motorized pallet infeed and outfeed conveyors
• with automatic empty pallet stacker
• with automatic tier sheet / tray removal system

Process automation drastically reduces the need for manpower, improves operator safety and increases overall productivity, ensuring a faster and steadier flow of containers.

The modular design of the machine allows different layout configurations, according to the positioning requirements on the line.

Production capacity: up to approx. 3.5 layers / min, depending on the type of containers handled and the machine’s level of automation.